high power 20(.787) 15(.59) + + + - - - 4 60 7.30.2870.1(.004) 6.8(.268)0.1(.004) 1.5(.06) 7.85(.31) 4.5(.177) fyl fyl fyl fylp pp p- -- -5 55 5w ww w- -- -uw uwuw uwl ll l features: radiation pattern long operating life highest flux available in white lambertian radiation pattern more energy efficient than incandescent and most halogen lamps low voltage dc operated cool beam,safe to the touch instant light (less than 100ns) fully dimmable no uv superior esd protection eutectic die band,lower rth. rohs compliant Clead-free instant light (less than 100ns) package dimensions applications reading lights (car,bus,aircraft) portable(flashlight,bicycle) orientation mini-accent decorative fiber optic alternative appliance sign and channel letter architectural detail cove lighting automotive exterior ( stop-tail-turn,chmsl,mirror s ide repeat) edge-lit signs(exit,point of sale) relativelumionousintensity(lop@max=1)
high power typical optical/electrical characteristics@t typical optical/electrical characteristics@t typical optical/electrical characteristics@t typical optical/electrical characteristics@tj jj j=25 =25 =25 =25 item symbol condition min typ max unit forwardvoltage vf if=1.2a 3.2 3.4 4.0 v reversecurrent ir vr=5v 50 ua 50%powerangle 2 1/2 if=1.2ma 110 120 140 deg luminousintensity v if=1.2ma 160 180 lm recommendforwardcurrent if 800 ma x 0.30 chromaticiyt coordinates y if=1.2a 0.30 thermalresistance,junctiontocase rjp if=1.2a 18 /w notes: 1. tolerance of measurement of forward volt age 0.1v; 2. tolerance of measurement of peak wavelength 2.0nm; 3. tolerance of measurement of luminous intensity 15%; absolute maximum rating item symbol absolute maximum rating unit forwardcurrent if 1.2 ma peakforwardcurrent* ifd 1.3 ma reversevoltage vr 5 v powerdissipation pd 5 mw electrostaticdischarge esd 4500 v operationtemperature t opr 30 to+80 storagetemperature t stg 40 to+100 leadsolderingtemperature* t sol 260 for3secondsmax ifp conditions :pulse width 10 msec duty1/10 all high power emitter led products mounted on alum inum metal-core printed circuit board, can be light ed directly ,but we do not recommend lighting the high power products for more than 5 seconds without a directly,but we do not recommend lighting the high powe products for more than 5 seconds without a appropriate heat dissipation equipment. re-flow, wave peak and soak-stannum soldering etc. is not suitable for this products. sueggest to solder it by professional high power le d soldering machine. can use invariable Ctemperature searing-iron with s oldering condition: 260 degreen less than 3 seconds.
high power normalized response wave length(nm) spectral reduance typical optical/electrical characteristics curves ( tj=25 unless otherwise noted)
|
